en
Installation and connection
16
2.
Unscrew and remove all four
screws for the transit bolts with a
WAF 13 wrench.
3.
Pull the power cord out of the
holder.
4.
Remove the four sleeves.
5.
Put on the four cover caps.
6.
Press down on the four cover
caps.
Removing the transport struts
Note:
Please read the information in
the "Safety" →
sec-
tions to ensure that you use the appli-
ance safely.
Содержание WAX32EH0ES
Страница 59: ...Cleaning and servicing en 59 3 Connect the water inlet hose and check for leaks ...
Страница 75: ......