en
Home Connect
52
1.
Set the programme to position 6.
—˜š
(update) appears in the display.
A
flashes if a software update is
available.
2.
Press
A
.
¢“†
appears in the display.
3.
Press
A
.
Note:
The software update may take
several minutes. Do not switch the
appliance off while updates are being
installed.
Information on data protection
When your appliance is connected for
the first time to a Wi-Fi network, which is
connected to the Internet, your
appliance transmits the following
categories of data to the Home Connect
server (initial registration):
■
Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
installed Wi-Fi communication
module).
■
Security certificate of the Wi-Fi
communication module (to ensure a
secure data connection).
■
The current software and hardware
version of your household appliance.
■
Status of any previous resetting to
factory settings.
This initial registration prepares the
Home Connect functions for use and is
only required when you want to use
these Home Connect functions for the
first time.
Note:
Ensure that the Home Connect
functions can be used only in
conjunction with the Home Connect
app. Information on data protection can
be accessed in the Home Connect app.
Declaration of Conformity
Robert Bosch Hausgeräte GmbH
hereby declares that the appliance with
Home Connect functionality meets the
basic requirements and other relevant
provisions of the Directive 2014/53/EU.
A detailed RED Declaration of
Conformity can be found online at
www.bosch-home.com among the
additional documents on the product
page for your appliance.
2.4 GHz band: max. 100 mW