Additional programme settings
en
37
\
Additional programme
settings
Additional programme settings
An overview of all additional settings,
which can be selected depending on
the programme, can be found from
SpeedPerfect
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more energy
than, the selected programme, without
the SpeedPerfect setting.
Note:
Do not exceed the maximum
load.
EcoPerfect
Energy-optimised washing by reducing
the temperature while achieving a
washing result that is consistent with the
selected programme, without the
EcoPerfect setting.
Prewash
(
T
)
For heavily soiled laundry.
Note:
Pour detergent into
compartments
I
and
II
.
Rinse Plus
(
'
)
Additional rinse cycle for particularly
sensitive skin and/or for areas with very
soft water.
Easy-Iron
(
p
)
Reduces creasing thanks to a special
spin sequence followed by fluffing and
reduced spin speed.
Note:
The washing's residual moisture
is increased.
Stains
(
x
)
There are four types of stain to choose
from:
The washing machine adjusts the
average washing temperature, drum
movement and soaking time to the
specific type of stain. Hot or cold water,
gentle or intensive washing and long or
short soaking ensure that the wash-
programme sequence is specially
adapted to each type of stain. This
makes sure that stains are treated in the
best possible way.
Note:
Pressing and holding the buttons
automatically runs through the set
values.
1
Operating the
appliance
Operating the appliance
Preparing the washing
machine
Note:
The washing machine
must be
correctly installed
and
connected
.
°
Food-based grease/oil
|
Blood
º
Red wine
·
Grass