29
Resetting your network settings
You can reset all of the network settings.
Ensure that you are in the Home Connect menu.
Calling up the Home Connect menu; Page 27
1.
Set the program to position 5.
§“à
(reset network settings) appears in the display.
2.
Press
Start/Pause
.
¢“à
appears in the display.
3.
Press
Start/Pause
.
Note:
If you want to operate your appliance via the
Home Connect app again, you will need to reconnect it
to your home network and to the Home Connect app.
Updating the software
You can update the Home Connect software on your
appliance. As soon as a new software update is
available, a message appears in the display:
—˜š
Install the update directly via the
message in the display
or
manually
as follows:
Ensure that you are in the Home Connect menu.
Calling up the Home Connect menu; Page 27
1.
Set the program to position 6.
—˜š
(update) appears in the display. Start/Pause
flashes if a software update is available.
2.
Press
Start/Pause
.
¢“à
appears in the display.
3.
Press
Start/Pause
.
Note:
The software update may take several minutes.
Do not switch the appliance off while updates are being
installed.
Information on data protection
When your appliance is connected to a WLAN network
that is connected to the Internet for the first time, your
appliance transmits the following categories of data to
the Home Connect® server (initial registration):
▯
Unique appliance identification (consisting of
appliance codes as well as the MAC address of the
installed WiFi communication module).
▯
Security certificate of the WiFi communication module
(to ensure a secure data connection).
▯
The current software and hardware version of your
domestic appliance.
▯
Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.
Note:
Home Connect functions can be used only in
conjunction with the Home Connect app. Information on
data protection can be accessed in the Home Connect
app.
Declaration of Conformity
BSH Home Appliances Group hereby declares that the
appliance which features Home Connect functionality is
in accordance with the essential requirements and other
relevant provisions of the following Directives.
Wi-Fi® Module FCC/IC Statements
Model: COM1
FCC ID: 2AHES-COMGEN1
IC: 21152-COMGEN1
The Home Connect module is a communication device
designed to provide communication between appliances
and smart devices.
This module is integrated at the factory, under direct
control of B/S/H Home Appliances Corporation, and is
not user serviceable or upgradable. At least 20cm
separation distance should be maintained from device to
user.
FCC COMPLIANCE STATEMENT
9
CAUTION
Changes or modifications not expressly approved
could void your authority to use this equipment.
This device complies with Part 15 of the FCC Rules.
Operation to the following two conditions:
▯
This device may not cause harmful interference and
▯
this device must accept any interference received,
including interference that may cause undesired
operation.
INDUSTRY CANADA STATEMENT
This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the
following two conditions:
▯
This device may not cause interference and
▯
this device must accept any interference, including
interference that may cause undesired operation of the
device.
WiFi is a registered trademark of Wi-Fi Alliance.
Содержание WAW285H1UC
Страница 1: ...en us Use and Care Manual Installation Instructions Washer WAW285H1UC ...
Страница 46: ......
Страница 47: ......