Bosch WAW28440SG Скачать руководство пользователя

Страница: 37 / 52

Operating the appliance

Change the programme

default settings

You can use or change the default

settings for this washing cycle.
To do this, repeatedly press the

corresponding button until the required

setting is displayed.

Note:

Pressing and holding the button

automatically runs through the set

values to the end. Then press the button

once more and you can then change

the setting values again.

The settings are activated without

needing to be confirmed.
The settings are not saved after

switching off the washing machine.
Default programme settings

Page 33

Select additional programme

settings

By selecting additional settings, you can

better adapt the washing process to

your items of laundry.
The settings can be selected or

deselected depending on the

programme progress.
The button indicator lamps light up if a

setting is activated.
The settings are not saved after

switching off the washing machine.
Additional programme settings

Page 34

Start the programme

Press the

button. The indicator lamp

lights up and the programme starts.
The display panel shows the "Ready in"

time while the programme is running or

the programme length and the

programme progress symbols when the

washing programme has started.

Display panel

Page 26

Note:

Foam detection

If the

symbol also lights up in the

display panel, the washing machine has

detected too much foam during the

wash programme and automatically

activated additional rinse cycles to

remove the foam.

Add less detergent to the next washing

cycle with the same load.

If you want to lock the programme to

prevent it from being inadvertently

adjusted, you can select the childproof

lock as follows.

Child lock.

3 sec.

You can lock the washing machine to

prevent the functions you have set from

being changed inadvertently. To do this,

activate the childproof lock.

activate/deactivate

, press and hold

the

Finished in

and

buttons at the

same time for approx. three seconds.

The

symbol is appears in the display

panel.

■

lights up: The childproof lock is

active.

■

flashes briefly: The childproof lock

is active and the programme

selector was turned or a button was

pressed.

Note:

The childproof lock remains

active, even once the washing machine

has been switched off. Before selecting

the next programme, deactivate the

childproof lock.

Содержание WAW28440SG





















































Результаты поиска

Содержание WAW28440SG

Отзывы:

Похожие инструкции для WAW28440SG

Бренды по названию

Популярные бренды

Bosch WAW28440SG, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WAW28440SG

Отзывы:

Похожие инструкции для WAW28440SG

Бренды по названию

Популярные бренды