Installation and connection
en
17
Connecting the appliance
Connect your appliance to the power
supply, water inlet and water outlet.
Connecting the water inlet hose
Note:
Please read the information in
the "Safety" →
sec-
tions to ensure that you use the appli-
ance safely.
1.
Connect the water inlet hose.
2
1
2.
Connect the water inlet hose to a
tap (26.4 mm = 3/4").
¾˝
min.
min.
10 mm
17 mm
¾˝
min.
10 mm
3.
Open the water tap carefully and
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
Note:
Please read the information in
the "Safety" →
sec-
tions to ensure that you use the appli-
ance safely.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
▶
Secure the water outlet hose
against unintentional loosening.
Drainage into a si-
phon.
Secure the connec-
tion point with a (24–
40 mm) hose clamp.
Drainage into a wash
basin.
Fix and secure the wa-
ter outlet hose with an
elbow.
Drainage into a plastic
pipe with rubber
sleeve or into a gully.
Fix and secure the wa-
ter outlet hose with an
elbow.
Connecting the appliance to the
electricity supply
Note:
Please read the information in
the "Safety" →
sec-
tions to ensure that you use the appli-
ance safely.
1.
Insert the mains plug of the appli-
ance's power cable in a socket
nearby.
The connection details of the appli-
ance can be found under "Tech-
nical data" →
2.
Check the mains plug is inserted
properly.