Basic settings
en
39
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip:
For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com
15.8 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡
Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡
Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡
The current software and hardware
version of your appliance.
¡
Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note:
Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
16 Basic settings
You can configure the basic settings
for your appliance to meet your
needs.
16.1 Overview of the basic
settings
Basic setting
Description
end signal
Volume of the
signal emitted
when the pro-
gramme ends
button signal
Volume of the
signal emitted
when the buttons
are pressed
Drum clean ad-
vice
Activate or deac-
tivate the re-
minder to clean
the drum
Language
Changing
the language
Aut. network log-
in
Connect the ap-
pliance to a
WLAN home net-
work (Wi-Fi) with
WPS function.
→
Man. network
log-in
Connect the ap-
pliance to a
WLAN home net-
work (Wi-Fi)
without WPS
function.
→
