Home ConnectNL
1.
At least 3 seconds on ken.
Busy-
16.2 Connecting device to
WLAN home network
(WiFi) without WPS
function
aThe display showsauto
to give.
reflected
2.
Press .
3.
Press the WPS button on the
router within 2 minutes.
If your router does not have WPS
function, you can manually connect the
device to your home network (Wi-Fi).
Follow the information in your
router's documentation. a
flashes on the display. aThe device
is connecting
with the home Wi-Fi network.
aWhen on the displayconis going to be
is displayed and lights up permanently,
then the device is connected to the
home WiFi network.
Requirements
†Wifi on the router is activated. †The
basic WiFi setting on the device
rate is activated.
†Activate WiFi on the device",
†The appliance has
cation reception from the home
network (Wi-Fi).
†The Home Connect app is on the
mobile terminal installed.
4.
If the displayerrshows, the device is
not connected to the home Wi-Fi
network.
†
Check if the device is within
range of the Wi-Fi network.
†
Reconnect the device to the Wi-
Fi network with WPS function.
1.
At least 3 seconds on ken.
Busy-
aThe display showsauto
to give.
reflected
2.
Set the program to position 2.
5.
Connect the appliance to the Home
aThe display showsJUICE
datum.
again-
3.
Press .
aflashes in the display
aThe device creates its own WiFi
home network with the network
name (SSID) HomeConnect on.
4.
Call up the WiFi settings on the
mobile end device.
†
Connect the mobile terminal device to
the HomeConnect WiFi network and
enter the HomeConnect WiFi
password (key).
aYour mobile end device makes
connection to the device. The
connection procedure can take up
to 60 seconds.
5.
Open the Home Connect app on
the mobile end device and follow
the steps in the app.
39
Содержание WAU28PH5NL
Страница 21: ...usageNL 9 Start the first wash cycle or press to switch off the appliance The Ministry in Essence Page 33 21 ...
Страница 65: ......
Страница 66: ......
Страница 67: ......