Set up and connectNL
4.6 Adjusting the device
3.
Tighten the lock nuts against the
housing with an open-end wrench
SW17 hand-tight.
To reduce noises and vibrations and to
prevent the device from walking, place
the device horizontally.
1.
Loosen the lock nuts with a SW17
open-end wrench.
Hold the appliance foot while
doing so and do not adjust the
height.
4.7 Connecting the appliance
electrically
2.
To adjust the appliance, turn the
appliance feet. Check the horizontal
adjustment of the appliance with a
spirit level.
Remark:Your home electrical
installation for this appliance must
comply with local legal and safety
regulations and must include an
earth leakage circuit breaker.
1.
Insert the mains plug of the mains
cable of the device into a socket
in the vicinity of the device.
The connection data of the device
can be found in the technical data
All appliance feet must be firmly
planted on the floor.
2.
Check the mains plug for tightness.
17
Содержание WAU28PH5NL
Страница 21: ...usageNL 9 Start the first wash cycle or press to switch off the appliance The Ministry in Essence Page 33 21 ...
Страница 65: ......
Страница 66: ......
Страница 67: ......