Bosch WAU28640TC, Инструкция по эксплуатации и руководство по установке

Страница: 40 / 52

en
Appliance settings
40
Q
Appliance settings
Appliance settings
Automatic switch-off
If the appliance is not operated for a
prolonged period (at least 20 minutes,
depending on the water level inside of
appliance), it will automatically switch
off before the programme starts or after
the programme has ended. Press the
power button
#
again to switch on the
appliance.
Basic settings
To access the basic settings, touch and
hold the
㬮瞥
(Silent wash)
button for
approx. 3 seconds. You can exit the
setting by touching
㬮瞥
(Silent wash)
button. The control panel show:
You can change the following basic
settings:
■
The volume of the end signal.
■
The volume of the buttons.
■
The brightness of the Touch-Display.
■
Switching the Drum Clean
information signal on/off.
End signal
You can select position
1
and use the
˜
button to adjust the volume of the
end signal, e.g.
‘
-
„
.
Possible setting values:
Button signal
You can select position
2
and use the
˜
button to adjust the volume of the
button signal, e.g.
›
-
„
.
Possible setting values:
0 off
1 quiet
2 medium
3 loud
4 very loud
0 off
1 quiet
2 medium
3 loud
4 very loud