![background image](http://html.mh-extra.com/html/bosch/wau28540tc/wau28540tc_instruction-manual-and-installation-instructions_52232040.webp)
en
Cleaning and maintenance
40
5.
Refit and screw on the pump cover.
The handle must be in a vertical
position.
6.
Close the service flap.
Note:
To prevent unused detergent
from flowing straight into the drain
during the next wash: Pour 1 litre of
water into dispenser
II
and start the
Rinse
or
Spin
programme.
The drain hose at the siphon
is blocked
1.
Press the
#
button. Pull out the
mains plug.
2.
Loosen the hose clamp. Carefully
remove the drain hose; residual
water may leak out.
3.
Clean the drain hose and siphon
connecting piece.
4.
Re-attach the drain hose and secure
the connection point using the hose
clamp.
Filter in the water supply is
blocked
Release water pressure in the supply
hose:
1.
Turn off the water tap.
2.
Select any programme (except
Rinse
or
Spin
programme).
3.
Select the
A
button. Allow the
programme to run for approx. 40
seconds.
4.
Press the button
#
.
5.
Pull out the mains plug.
Clean the filters:
1.
Disconnect the hose from the rear of
the appliance.
Содержание WAU28540TC
Страница 47: ...6 ...