Positioning and connecting
en
15
3.
Fit the covers. Lock the covers firmly
in place by applying pressure to the
snap-in hooks.
Removing the support struts
1.
Unscrew and remove all screws in
the vertical transport struts.
2.
Remove the transport struts.
3.
Undo and remove the screws on the
horizontal transport strut.
4.
Remove the transport strut.
Hose and cable lengths
■
Left-hand connection
■
Right-hand connection
*depending on the model
Tip:
If the supply hose is too short for
your connection, you can order an
extension from the after-sales service.
7
7
PD[FP
PD[FP