en
Getting to know the appliance
22
Display panel
In the table you can find possible settings and information in the display panel;
these differ depending on the model.
Settings for the selected programme
—
- 90*
Temperature in °C
Temperature
- - - -, 0 - 1400* Spin speed in rpm
(revolutions per minute)
Maximum spin speed or - - - - (Rinse stop = no final drain,
washing remains in the water after the last rinse)
1:30
Programme length
Depends on the programme selection in h: min (hours: min-
utes)
1 - 24
Finish in h (hours)
End of programme after ... Hours
10 kg
Load in kg
Maximum load
* Depending on the model
Status indicators for the programme progress (programme sequence)
N
,
à
,
0
, End
Wash, rinse, spin/drain, programme end.
E
Childproof lock
Lights up: The childproof lock is activated.
Flashes: The childproof lock is activated, and if the pro-
gramme selector has been adjusted or the buttons have been
pressed.
Õ
Door lock
Lights up: When the door can not be opened.
r
Tap
Lights up: Water pressure is too low. This extends the pro-
gramme duration.
Flashes: The tap has not been turned on or there is no water
supply.
Å
Overdosage
On if too much foam detected, one additional rinse cycle
switched on.
- - - -
é
*
Power consumption.
* Depending on the model
