en
Sensors
36
H
Sensors
Sensors
Automatic load sensing
The automatic load sensing function
adapts the water consumption ideally to
each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the speed is reduced or the
spin cycle is not performed for safety
reasons.
Note:
Place large and small items of
laundry evenly in the drum.
VoltCheck
depending on the model
The colon in the Finished in-time
display:
■
Flashes
, if the voltage is currently
too low.
■
Pulses
, if insufficient voltage was
detected during the programme.
Note:
Insufficient voltage may lead to
programme extensions and/or a non-
satisfactory spin result, for example.
2
Cleaning and
maintenance
Cleaning and maintenance
:
Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
Switch off the appliance and pull out the
mains plug.
:
Warning
Risk of poisoning!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
Damage to the appliance
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.
Prevent detergent residue from
building up and odours from forming
by following these instructions:
Notes
■
Ensure the room in which the
washing machine is set up is well
ventilated.
■
Leave the door and detergent
dispenser tray open slightly when
the washing machine is not in use.
■
Occasionally run a wash using the
Cottons 60 °C
programme and
powder detergent.
Machine housing/control
panel
■
Wipe the housing and the control
panel with a soft, damp cloth.
Содержание WAT28799HK
Страница 47: ...6 ...
