Positioning and connecting
en
19
Transportation
E.g. when moving house
Preparatory work:
1.
Turn off the tap.
2.
Release the water pressure in the
supply hose:
3.
Disconnect the washing machine
from the mains power supply.
4.
Drain the remaining water:
drain pump is blocked, emergency
5.
Detach the hoses.
6.
Caution!
Risk of damage to the appliance
caused by detergent/fabric softener
leaking from the dispensers
Leaking detergent/fabric softener
can prevent the appliance from
working correctly, e.g. due to
damage to the electronics.
Empty the dispensers before
transporting the appliance.
Fitting the transportation securing
means:
1.
Remove the covers and keep them
in a safe place.
If required, use a screwdriver.
2.
Insert all four sleeves.
Clip the mains cable securely in the
holders. Insert the transportation
securing bolts and tighten them with
a wrench (WAF 13).
Before switching on the appliance
again:
Notes
■
The transit securing devices
must
be removed.
■
To prevent unused detergent from
flowing straight into the drain during
the next wash, pour approx. 1 litre of
water into the manual dosing
compartment, select the
Drain
program and start this program.
