Bosch WAT Series, Инструкция по эксплуатации и руководство по установке

Страница: 33 / 58

Operating the appliance
en
33
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1.
Touch the control panel
A
.
2.
Select another programme.
3.
And touch
A
again.The new
program starts from the beginning.
Cancel the programme
For programs at high temperature:
1.
Touch the control panel
A
.
2.
To cool the laundry: Select
Rinse
.
3.
And touch
A
again.
For programmes at low temperatures:
1.
Touch
A
.
2.
Select
Spin
or
Drain/Empty
.
3.
And touch
A
again.
Programme end during rinse
hold
The
A
indicator flashes in the display
panel, and the preset spin speed and
remaining programme length are
displayed for the selected programme.
Continue the programme by:
■
Touching
A
on the control panel or
■
Changing the spin speed and then
touching
A
or
■
Selecting the Easy-Iron
Q
setting
and then touching
A
or
■
Turning the programme selector to
Drain/Empty
and then touching
A
.
Programme end
End
lights up in the display panel and
the
A
and
è
displays are off.
Note:
If the
Û
display flashes, this
informs you to run the
Drum Clean
programme or any other programme at
a washing temperature of at least
60 °C.
Removing laundry/switching
off the appliance
1.
Open the loading door and remove
the laundry.
2.
Switch off the appliance.
3.
Turn off the tap.
Note:
Not required for AquaStop
models.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber gasket – risk of
rusting.
■
Wipe the rubber gasket dry.
■
Leave the loading door and
detergent drawer open so that any
remaining water can evaporate.
■
Always wait until the programme
ends; otherwise the appliance could
still be locked. Then switch the
appliance on and wait for it to
unlock.