background image

Positioning and connecting       

en

31

5

Positioning and 

connecting

Positioning and connecting

Included with the appliance

Note:  

Check the machine for transport 

damage. Never use a damaged 

machine. If you have a complaint, 

please contact the retailer from whom 

you purchased the appliance, or our 

after-sales service.

In addition,

 a hose clamp ( 24 - 40 mm 

diameter, available from specialist 

dealers) is required to connect the 

water drain hose to a siphon. 

Useful tools

Spirit level for levelling

Wrench with:

– WAF 13 for loosening the 

transport locks, and 

– WAF 17 for aligning the 

appliance feet

Safety instructions

:

Warning

Risk of injury!

The washing machine is very heavy.

Be careful when lifting/transporting 

the washing machine.

When the washing machine is lifted 

by its protruding parts (e.g. the 

washing machine door), the 

components may break off and 

cause injuries.

Do not lift the washing machine by 

protruding parts.

If the hose and mains cables are not 

routed properly, there is a risk of 

tripping and injury.

Lay hoses and cables in such a way 

that there is no risk of tripping.

Caution!

Damage to the appliance

Frozen hoses may rip/burst.

Do not install the washing machine in 

areas exposed to frost or outdoors.

Caution!

Water damage

The connection points for the water 

supply hose and water drain hose are 

under high water pressure. To prevent 

(

Mains cable

0

Bag:

Installation and operating instructions

After-sales service location directory*

Warranty*

Cover caps for openings left after 

removing the transport locks

Wrench

*

8

Water supply hose on Aqua-Stop models

@

Water drain hose

H

Elbow for securing the water drain hose*

#

3

+

P

Water supply hose on standard/Aqua-

Secure models
*depending on the model

Содержание WAK2020SGC







































Отзывы: