Bosch WAK20160IN Скачать руководство пользователя страница 17

Страница: 17 / 40

Additional programme settings

Additional programme

settings

Additional programme settings

SpeedPerfect

For washing in a shorter time with a

washing result comparable to that of the

standard programme.

Notes

■

Do not exceed the maximum load.

Overview of programmes

Page 13

■

SpeedPerfect

is preset by

default. To deactivate this additional

default setting, press the

SpeedPerfect

button. The

indicator light goes off.

Water Plus

Increased water level and additional

rinse cycle, extended washing time. For

areas with very soft water or for further

enhancing the spin result.

Operating the

appliance

Operating the appliance

Preparing the washing

machine

Note:

The washing machine

must be

correctly installed

and

connected

Page 32

Connect the mains plug.

Turn on the water tap.

Open the door.

Check that the drum is completely

drained. Drain if necessary.

Select programme/switch on

the appliance

Note:

If you have activated the

childproof lock, you must first deactivate

it before you can set a programme.

Childproof lock

Page 20

Use the programme selector to select

the required programme. Can be turned

in either direction.
The machine is switched on.

The display panel shows the following

information consecutively for the

selected programme:

■

The programme duration,

■

The preset spin speed and

■

The maximum load.

Change the programme

default settings

You can use the default settings or

change them.
To do this, repeatedly select the

corresponding button until the required

setting is displayed.
The settings are activated without

needing to be confirmed.
They are not saved when the appliance

is switched off.
Programme default settings

Page 16

Overview of programmes

Page 13

Содержание WAK20160IN









































Результаты поиска

Содержание WAK20160IN

Отзывы:

Похожие инструкции для WAK20160IN

Бренды по названию

Популярные бренды

Bosch WAK20160IN, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WAK20160IN

Отзывы:

Похожие инструкции для WAK20160IN

Бренды по названию

Популярные бренды