en
Additional programme settings
16
\
Additional programme
settings
Additional programme settings
Prewash
T
(Prewash)
Additional Pre-wash at 30°C (including
10 min soaking phase).
Quick
e
For washing in a shorter time with a
washing result comparable to that of the
standard programme.
Note:
Do not exceed the maximum
load.
Overview of programmes
1
Operating the
appliance
Operating the appliance
Preparing the washing
machine
Note:
The washing machine
must be
correctly installed
and
connected
.
1.
Connect the mains plug.
2.
Turn on the water tap.
3.
Open the door.
4.
Check that the drum is completely
drained. Drain if necessary.
Select programme/switch on
the appliance
Use the programme selector to select
the required programme. Can be turned
in either direction.
The machine is switched on.
