en
operation
28
13.5 Adding detergent and
care product
Note:
Observe the information about
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.6 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
Start / Reload
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows: "End".
13.7 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡
The programme is set.
→
"Setting a programme", Page 27
¡
The "Ready in" time is set and ac-
tivated.
→
1.
Press
Start / Reload
.
The activated "Ready in" time is
paused.
2.
Press
Finished in
repeatedly un-
til the display indicates the desired
"Ready in" time.
3.
Press
Start / Reload
.
The changed "Ready in" time is ac-
tivated.
13.8 Adding laundry
1.
Press
Start / Reload
.
The appliance pauses.
Note:
If appears, it is not pos-
sible to add laundry.
When goes out, it is possible to
add laundry.
2.
Open the appliance door.
3.
Add or remove laundry.
4.
Close the appliance door.
5.
Press
Start / Reload
.
13.9 Cancelling the pro-
gramme
1.
Press
Start / Reload
.
2.
Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Rinse
programme.
– If the water level is high, start
the
Spin
programme or select
a suitable programme for drain-
ing.
→
3.
Содержание WAJ20170ME
Страница 33: ...Cleaning and servicing en 33 5 Insert and close the service flap 2 1 ...
Страница 47: ......