background image

Positioning and connecting       

en

9

In addition,

 a hose clamp (24 - 40 mm 

diameter, available from specialist 

dealers) is required to connect the 

water drain hose to a siphon. 

Useful tools

Spirit level for levelling

Wrench with:

– WAF 13 for loosening the 

transport locks, and 

– WAF 17 for aligning the 

appliance feet

Safety instructions

:

Warning

Risk of injury!

The washing machine is very heavy.

Be careful when lifting/transporting 

the washing machine.

When the washing machine is lifted 

by its protruding parts (e.g. the 

washing machine door), the 

components may break off and 

cause injuries.

Do not lift the washing machine by 

protruding parts.

If the hose and mains cables are not 

routed properly, there is a risk of 

tripping and injury.

Lay hoses and cables in such a way 

that there is no risk of tripping.

Caution!

Damage to the appliance

Frozen hoses may rip/burst.

Do not install the washing machine in 

areas exposed to frost or outdoors.

Caution!

Water damage

The connection points for the water 

supply hose and water drain hose are 

under high water pressure. To prevent 

leaks and water damage, you must 

follow the instructions in this section.

Notes

In addition to the safety information 

listed here, the local water and 

electricity supplier may have special 

requirements.

If in doubt, have the appliance 

connected by a specialist.

Installation surface

Note:  

The washing machine must be 

aligned in a stable manner so that it 

does not move around.

The installation surface must be firm 

and level.

Soft floors/floor coverings are not 

suitable.

(

Mains cable

0

Bag:

Installation and operating 

instructions

After-sales service location 

directory*

Warranty*

Supplementary sheet for the 

installation and operating 

instructions*

Cover caps for openings left 

after removing the transport 

locks

Wrench*

8

Water drain hose

@

Elbow for securing the water drain 

hose*

H

Water supply hose on standard/

Aqua-Secure models

P

Water filter*

*depending on the model

Содержание WAJ Series









































Отзывы: