Bosch VLS 5235, Оригинальное руководство пользователя

Страница: 15 / 38

1 697 090 700 2014-04-10
|
Robert Bosch GmbH
Operation | VLS 5235 | 15 VLS 5235 | 15 | 15 en
6.6.3 Raise auxiliary lift
1. Turn the optional switch on the control panel to
“
Auxiliary lift ”.
2. Place rubber pads under the pick-up positions of
vehicle. When it is necessary to use the platform
extensions, press “
UP ” button to raise platforms of
the jack a bit over the platforms of main lift and pull
out the extensions.
3. Press “ UP ” button and check again if the rubber
pads are directly under the pick-up points of the
vehicle, when they are very close to the vehicle’s
chassis.
4. Keep on pressing ” UP ” button until reaches to the
height wanted. Full rise of the jack is 450mm over
the platform of main lift.
5. Press the “Safety Lock” button making mechanical
locks of the jack fully engaged before service work.
6.6.4 Lower Auxiliary lift
i
In case the platform extensions of the jack are used,
the operator needs to push them in when wheels of
the serviced vehicle fall on steadily the platforms of
the main lift
1. Turn the optional switch on the control panel to
"
Auxiliary lift ".
2. In the case height of the lifting platform is more than
500mm over the floor, press "
DOWN I " button on the
control panel to lower the jack, while the height is
less than 500mm, press "
DOWN II " button to lower
the jack. Alarming buzz will be heard when pressing
"
DOWN II " button.
3. Take away rubber pads.