© Bosch Healthcare Solutions GmbH
15
Instructions for use
Menu
To configure or set up a new Ethernet connection:
Select
configure network
:
As network type select
Ethernet 1
.
Select
DHCP enabled
to support
dynamic host configuration protocol
from the network.
Select
DHCP disabled
to set the following components manually:
• Internet protocol address (IP address)
• Subnet mask
• Gateway
Follow the instructions displayed on the screen.
To configure or set up a new WLAN connection:
Select
configure network
:
As network type select
WLAN
. The following components have to be set manually:
• Service set identifier (SSID)
• Security protocol
• WLAN password
Select
DHCP enabled
to support dynamic host configuration protocol from the network.
Select
DHCP disabled
to set the following components manually:
Internet protocol address (IP address)
Subnet mask
Gateway
Follow the instructions displayed on the screen.
If necessary a
proxy
can be configured.
To view the current configuration, select show network configuration.
5.4 Configuration of order/result interface (HIS/LIS)
The analyser exchanges information with hospital and laboratory information systems (HIS/LIS), if connected.
It receives orders from the system and uploads results.
Log in as an
administrator
for access.
4
C O N T I N U E
enabled
In the
menu
, select
settings
, select
network/interfaces
, then select
order/result interface
.
To configure or set up a new order/result interface to HIS/LIS:
Select
configure interface
:
The following components have to be set manually:
• Inbox location
• Outbox location
• Username
• Password
Follow the instructions displayed on the screen.
To view the current configuration, select show interface configuration.
The network must be connected to set up an HIS/LIS configuration.
Содержание Vivalytic
Страница 1: ...Instructions for use ...
