© Bosch Healthcare Solutions GmbH
12
Instructions for use
Performing a test
3.5 Test result and test report
The results are displayed in three levels of detail:
overview
,
data list
and
illustrations
.
Result saved and submitted.
Cartridge is ready to eject.
ID 342 485 58
TEST NAME
F I N I S H
Test valid
Target 1, Target 2, Target 3, ...
D E TA I LS
After execution of a test, the
result overview
screen
appears. It shows if the
test is valid
or
invalid
.
Press
details
to view a
data list
which shows results
for available targets:
• Positive:
target(s) detected
• Negative:
target(s) not detected
By pressing on the next tab, more information is visible.
When a target is selected, the corresponding signal will
be highlighted. The displayed images and curves are for
illustration purpose only.
For further information about test results please refer
to the application-specific instructions for use.
4
C O N T I N U E
enabled
Export
a
specific test
to save the test report in PDF format.
4
C O N T I N U E
enabled
a test report of a
specific test
run.
The
test
report
summarises the sample and test
description, the results and illustrations of the test run, the
user who started the test and information about the analyser
and the cartridge.
4
C O N T I N U E
enabled
• The results should not be used as a sole parameter for a diagnosis or screening.
• You can find
running
,
pending
and
done
test runs by pressing
joblist
.
For further information, please see chapter 4.
• If a test failed, check the notice and follow the given instructions.
3.6 Finishing a test
4
C O N T I N U E
enabled
Close the
details
screen after checking the test results.
Press
finish to eject the cartridge
.
The cartridge is ready to be
removed
and
disposed of
.
The
home
screen appears.
Please be aware that potentially infectious material remains in the cartridge. It has to be
disposed of according to regional and laboratory standards.
Содержание Vivalytic
Страница 1: ...Instructions for use ...
