Bosch VIP X2, Инструкция по установке и эксплуатации

Страница: 64 / 144

EN | 64 Installation and Operating Manual | VIP X2
Configuration using a Web browser Bosch Security Systems | 2006-12 | V2.5
– Click the Copy settings button if you want to copy the currently visible set-
tings to another profile. A dialog will appear, and you can select the target pro-
file for the copied settings.
– Click the Set button in each profile tab to save the settings in the device.
Standard profile:
You can select the encoder profile to use for continual recording (compare
page .42).
Note
The recording profile can deviate from the standard setting Active profile
for the video input set and is only used during an active recording.
Encoder:
You can select which data stream to record here.
Alarm track recording:
Note
This parameter is only active, if the alarm tracks have been configured for
the respective camera input, that is the respective partition (see page 61).
– Click the checkbox to activate alarm track recording. The pre-alarm time gap
will be displayed automatically.
Post-alarm time:
You can select the post-alarm time gap from the list box.
Post-alarm profile:
You can select the encoder profile to use for recording during the post-alarm
time (compare page 42). The
Standard profile option sets this to the same as
the standard profile.