Bosch VIP X1, Инструкция по установке и эксплуатации

Страница: 7 / 104

VIP X1/VIP X2 | Installation and User Guide EN | 7
Bosch Security Systems | 2005-05 | V1.0 Safety information
Safety information
2
Electric shock hazard
]
Never attempt to connect the unit to any power network other than the type
for which it was intended.
]
Use only the power supply provided.
]
Never open the housing!
]
If a fault occurs, disconnect the power supply unit from the mains supply and
from all other devices.
]
Install the power supply and the unit only in dry, weather-protected areas.
]
If safe operation of the unit cannot be ensured, remove it from service and
secure it to prevent unauthorized start-up. Safe operation is no longer
possible in the following cases:
– if there is visible damage to the unit or power cables,
– if the unit no longer works properly,
– if the unit has been exposed to rain or moisture,
– if foreign matter has infiltrated the unit,
– after long storage under adverse conditions or
– after exposure to extraordinary transport stress.
In such cases, have the unit checked by Bosch Security Systems.