Bosch VideoJet X10, Инструкция по установке и эксплуатации

Страница: 74 / 132

74 en | Configuration Using a Web Browser VideoJet X10
V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems
5.26.3 Relay follows
If required, select a specific event that will trigger the relay. The following events are possible
triggers:
–
Off
Relay is not triggered by events
– Connection
Trigger whenever a connection is made
– Video alarm
Trigger by interruption of the video signal
– Motion alarm
Trigger by motion alarm, as configured on the VCA page (see Section 5.23 VCA , page 65)
– Local input
Trigger by the corresponding external alarm input
– Remote input
Trigger by remote station's corresponding switching contact (only if a connection exists)
5.26.4 Relay name
You can assign a name for the relay here. The name is shown on the button next to Trigger
relay . The Livepage can also be configured to display the name under the relay icon.
5.26.5 Trigger relay
Click the button to trigger the relay manually (for testing or to operate a door opener, for
example).
i
NOTICE!
The numbers in the lists of selectable events relate to the corresponding connections on the
unit,
Video alarm 1 , for example to the Video In connection.