Bosch UPH Series, Руководство по эксплуатации

Страница: 55 / 82

Feature Description Default Options
TILT SPEED 7 20.0 0.1-40.0
Note: *IR models are limited to 30 deg/s on tilt
The data is expressed as degrees per second.
Zoom dependent speed by default is turned off. When the zoom-dependent function is turned
off, then the pan and tilt speeds of the UPH are unaffected by the zoom measurement of the
camera/lens combination. If the zoom-dependent function is turned on, the zoom
measurement of the camera/lens combination affects the pan and tilt speeds. This is useful
when the zoom is in telephoto (i.e. zoomed in); it slows down the pan and tilt speeds so that
very fine adjustments can be made to follow moving subjects.
Limits
The Limits menu sets the movement limits for the UPH. These limits apply to all presets,
autopan and patrols, including manual operation of the UPH using the joystick. After the limits
are set in the OSD and the UPH moves into the “limited pan and tilt zone”, it will not move
outside of those limits until they are altered in the OSD or the UPH is reset. On reset, the UPH
returns to within the limited pan and tilt zone.
LIMITS MENU
1 > PAN LIMITS : N
2 - START PAN :
+ 0.00
3 - END PAN :
+ 0.00
4 - TILT LIMITS : N
5 - START TILT :
+ 0.00
6 - END TILT :
+ 0.00
9 - RAMP TYPE : 012
12.3.2
High-Speed Positioning System
(HSPS)
Configuring the System | en 55
Bosch Security Systems, Inc. Operation Manual 2013.11 | 5.2 | F.01U.291.981