Bosch TSS Series, Инструкция по установке и обслуживанию

Страница: 21 / 32

Hydraulic connection
21
TSS – 6720887693 (2018/10)
9.3 Connecting potable water pipe
Installing pressure relief valve and expansion vessel
WARNING:
Risk of scalding at the pressure relief valve!
Due to differences in temperature and pressure in the storage tank,
water may escape from the pressure relief valve.
▶ Do not seal opening.
▶ Install an on-site expansion vessel (≥ 12 litres) on the cold water
storage tank connection.
If the water inlet pressure at the storage tank is higher than 4 bar:
▶ Install a pressure reducer and set to a max. of 4 bar.
NOTICE:
System damage due to overpressure.
To ensure the connection between the water inlet and pressure relief
valve remains clear:
▶ Do not install any extra accessories or shut-off valves.
▶ Install the pressure relief valve 8 bar [3] on the cold water storage
tank connection in such a way that the lever for venting can be set to
the maintenance position [6].
▶ Connect the cold and hot water pipes on site in accordance with local
regulations.
Fig. 55 Connecting potable water pipework
[1] DHW storage tank connection
[2] Cold water storage tank connection
[3] Pressure relief valve 8 bar (with non-return valve),
lever in operating position
[4] Water outlet opening
[5] Expansion vessel (on site)
[6] Lever in maintenance position (venting)
System examples
Fig. 56 System example without solar module
[1] Reheating
[2] Hot water
[3] Expansion vessel
[4] Domestic Cold water
[5] Pressure relief valve with siphon
[6] Thermostatic valve
[7] Thermosiphon system (only storage tank shown)
Fig. 57 System example with solar module
[1] Reheating
[2] Hot water
[3] Expansion vessel
[4] Domestic Cold water
[5] Pressure relief valve with siphon
[6] Solar module
[7] Thermosiphon system (only storage tank shown)
0010014881-01
5
3
1
2
4
6
4
5
3
1
6
2
0010011166-01
2
7
4
4
5
3
1
6
2
0010011167-01
2
7