Bosch TSS Series, Инструкция по установке и обслуживанию

Страница: 10 / 32

Installing the roof connection
TSS – 6720887693 (2018/10)
10
Transporting the storage tank
If you want to place the storage tank on level ground:
▶ Lay the storage tank on the styrofoam panel [1] of the packaging.
Fig. 11 Lay the storage tank on the styrofoam panel
To protect the storage tank during transport:
▶ Do not remove the DHW cylinder from its packaging until it has
reached the installation location.
▶ Position the hand truck at the side of the DHW cylinder with the
styrofoam panel.
▶ Secure the DHW cylinder to the means of transportation with a strap.
▶ Transport the DHW cylinder to the installation location.
▶ Remove the DHW cylinder from the packaging only at the installation
location.
Fig. 12 Transporting the storage tank with hand truck
6 Installing the roof connection
6.1 Transferring the clearances of the roof connection to the roof
NOTICE:
Roof leaks from incorrect positioning of the roof connection!
Roof tiles have a peak and a valley.
▶ Always install double-ended screws on the peak.
▶ Always install roof hooks in the valley.
▶ Determine the clearances and transfer to the roof.
Fig. 13 Roof connection clearances for: TSS300 (left) and TSS150/200 (right), values in brackets apply to TSS200
0010015281-01
1
0010015282-01
0010015737-01 0010015737-01
[mm]
1260-1620
1320
- 1680
1930
- 2000
520
- 590
610
- 910
1320
- 1680
1930
- 2000
520
- 590
740
- 890
(940
- 1090)
1690
- 1990
=
=
=
=