Basic settings
en-us
29
Basic settings
13 Basic settings
Basic settings
You can configure your appliance to meet your needs.
13.1 Overview of the basic settings
The basic settings depend on the features of your appliance.
Basic setting
Display
text
Selection
Description
Rinse aid disp.
r04
1
r00 - r06
Set the amount of rinse
aid.
Switch the rinse aid sys-
tem off with level r00.
Intensive drying d00
1
d00 - d01
The temperature is in-
creased during the final
rinse, which improves the
drying result. This may in-
crease the run time
slightly.
Note: Not suitable for del-
icate items of dishware.
Switch Intensive drying on
"d01" or off "d00".
infoLight®
I01
1
I00 - I01
Switch InfoLight on or off.
While the program is run-
ning, a spot of light is pro-
jected onto the floor below
the appliance door. This
light will not be visible if
the appliance is installed
at eye level with the cabi-
net front fitted flush. If the
appliance door is not com-
pletely closed, the spot of
light will flash. The pro-
gram has ended when the
spot of light is no longer
visible on the floor.
Level "I00" switches Info-
Light off.
Signal volume
b02
1
b00 - b03
Adjusting the signal vol-
ume.
Level "b00" switches the
signal tone off.
1
Factory setting (may vary according to model)