Cleaning and servicing
en
43
Performing Machine Care
Run the Machine Care programme if
the indicator for Machine Care lights
up on the control panel or if advised
to do so by the display.
Notes
¡
Run the Machine Care programme
without any tableware in the dish-
washer.
¡
Only use suitable machine care
products specially designed for
dishwashers and not dishwasher
detergent. Observe the manufac-
turer's instructions.
¡
Make sure that there are no alu-
minium parts in the interior of the
appliance.
¡
If you have not run Machine Care
after 3 washing cycles, the indic-
ator for Machine Care will go out
automatically.
¡
Follow the safety instructions and
the directions for use on the pack-
agings of the machine care
products.
1.
Remove any coarse soiling in the
interior with a damp cloth.
2.
Clean filters.
3.
Add the machine care product to
the appliance.
4.
Press .
5.
Press
.
a
The Machine Care programme is
run.
a
As soon as machine care has fin-
ished, the indicator for Machine
Care goes out.
Filter system
The filter system removes coarse
soiling from the dishwashing cycle.
1
2
3
1
Micro filter
2
Fine filter
3
Coarse filter
Cleaning filters
Soiling in the dishwashing water may
block the filters.
1.
After each wash check the filters
for residue.
2.
Turn the coarse filter anticlockwise
and remove the filter system .
‒
Check that no foreign objects
fall into the sump.
1
2
