manualshive.com logo in svg

Bosch SOLUTION 6000, Руководство пользователя

Поделиться
Скачать
Bosch SOLUTION 6000 Скачать руководство пользователя страница 37

37

Bosch Security Systems   12/14   BLCC610U

Solution 6000 User Guide

Trouble Condition

Description

Power Missing

The system has detected that the AC mains supply has failed or is disconnected on the control panel.  

If there is not a general power outage in your area then you should contact your security company.

AC Missing

The system has detected that the AC mains supply has failed or is disconnected on a power supply 

module.  If there is not a general power outage in your area then you should contact your security 

company.

Battery Low 

The backup battery has failed the periodic test which the system performs on a regular basis. You 

should contact your security company as the battery may need replacing.

Battery Missing

The system has detected that its backup battery has been disconnected.

Low Battery

The system has detected that an RF sensor has a low battery condition.  You should contact your 

security company as the battery may need replacing.

Box Tamper

The system has detected that the tamper circuit on a power supply module is faulted.

Temperature Alert

The system has detected that the keypad temperature has exceeded the global temperature high 

and/or temperature low settings.

Receiver Missing

The system has detected that the RF receiver is disconnected.

Case Tamper

The system has detected that the tamper circuit on the RF receiver is faulted.

Receiver Jam

The system has registered a jamming fault from the RF receiver. This situation may preven certain 

parts of your system from working correctly. You should contact your security company.

Comms Fail Route1

The system has failed to send reports to the primary report contact. You should contact your security 

company.

Comms Fail Route 2

The system has failed to send reports to the secondary report contact. 

You should contact your security company. 

Sensor Watch Alert

The control panel has detected a zone has failed to detect a change of state within the sensor watch 

period set by the installer.

Comms BUSS Trble

The system has failed to communicate to a system device (e.g. keypad etc).

Default PIN Trble

The system has detected that either the Installer PIN or User 1 PIN has not been changed from the 

factory default codes. These codes should be changed immediately to prevent a security risk. 

Date & Time

The system date and time needs to be set.

Cabinet Tamper

The system has detected that someone has tampered with its metal enclosure or that it has been 

forced open. Inspect and contact your security company if necessary.

Connection Trouble

The system has detected that an output device (eg. external siren) has failed or has been 

disconnected from the system.  

Overload Condition

The system has detected that an output has an over current condition.

Zone Was In Alarm

A zone was previously in alarm and requires alarm memory reset to clear.  Turn the area on and then 

off again to clear alarm memory.

Telco Line Fail

The system has detected that its telephone line has been disconnected for a minimum of 30 seconds.

LAN+ Overload

The system has detected that the current load has exceeded the maximum LAN rating. 

You should contact your security company. 

COMM+ Overload

The system has detected that the current load has exceeded it’s maximum COMM+ rating. 

You should contact your security company.

ACC+ Overload

The system has detected that the current load has exceeded it’s maximum ACCS+ rating. 

You should contact your security company.

Service Required

The system displays this trouble condition to remind you that a service call is due.

Memory Checksum

The system has detected an error with its internal memory.  

You should contact your security company.

Phone Line In Use

The system is using the phone line.

Battery Trouble

The system has detected that the Real Time Clock Module backup battery voltage is low or missing

Table 8: Control Panel Trouble Messages

Содержание SOLUTION 6000

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды