Basic settings
en
37
Basic setting
Display text
Selection
Description
EmotionLight
E02
1
E00 - E02
Interior light.
¡
With the setting "E00"m the in-
terior light is switched off.
¡
With the setting "E01", the in-
terior light can be activated via
the ON/OFF button.
¡
With the setting "E02", the in-
terior light goes on when you
open the appliance door.
When the appliance door is opened,
the interior lighting switches off auto-
matically after 10 minutes.
Tone volume
b02
1
b00 - b03
Adjustment of tone volume.
Level "b00" switches the signal tone
off.
Wi-Fi
Cn0
1
Cn0 - Cn1
Switch the wireless network connec-
tion on or off.
Level "Cn0" switches the wireless
network connection off.
Remote Start
rc1
1
rc0 - rc2
Activate or deactivate
.
The following settings are possible:
¡
With the setting "rc0", the func-
tion is permanently deactivated.
¡
With the setting "rc1", the func-
tion can be selected via the
button.
¡
With the setting "rc2", the func-
tion is permanently activated.
Factory setting
rE
Start with
YES
Confirm with
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
1
Factory setting (may vary according to model)
Changing basic settings
1.
Press .
2.
To open the basic settings, press
for 3 seconds.
a
The display shows Hxx.
a
The display shows
.
3.
Press
repeatedly until
the display shows the required set-
ting.
4.
Press
repeatedly until the dis-
play shows the right value.
You can change several settings.