aus
Basic settings
34
15 Basic settings
You can configure the basic settings for your appliance to meet your needs.
15.1 Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Display text Selection
Description
Rinse aid dis-
pensing
r05
1
r00 - r06
Set the amount of rinse aid
to be dispensed.
→
Switch the rinse aid system
off with level r00.
Intensive drying
d00
1
d00 - d01
The temperature is in-
creased during the final
rinse, which improves the
drying result. This may in-
crease the run time slightly.
Note:
Not suitable for delic-
ate items of tableware.
Switch Extra Dry on "d01" or
off "d00".
Hot water
A00
1
A00 - A01
Set cold water or hot water
connection. Only set the ap-
pliance to hot water if this
can be prepared with little
energy and a suitable install-
ation is available, e.g. solar
heating system with circula-
tion line. The water temperat-
ure should be at least 40 °C
and max. 60 °C.
Switch hot water on "A01" or
off "A00".
1
Factory setting (may vary according to model)
Содержание SMU4HVS01A
Страница 59: ......