NLCleaning and maintenance
5.
Clean the sieve elements under
running water.
Cleaning spray arms
Carefully clean the dirt edge between
the coarse and fine sieve.
Limescale and impurities in the wash
water can block the nozzles and
bearings of the spray arms. Clean the
spray arms regularly.
6.
Assemble the screening system.
Check that the coarse sieve locking
cams are engaged.
1.
Unscrew the upper spray arm and
pull it downwards
†
7.
Place the sieve system in the
appliance and turn the coarse
sieve clockwise.
†
Check that the arrow marks are
opposite each other.
1
2
2.
Pull the lower spray arm upwards.
3.
Check the nozzles of the spray arms
for blockages under running water
and remove any foreign objects.
4.
Install the lower spray arm.
aThe spray arm audibly clicks into place.
5.
Fit and screw on the upper spray
arm.
42
