NLRinse System
Overview of the consumption values
when regenerating the
softening system
1.
Press and lift the tab on the lid of
the rinse aid reservoir .
Here you will find an overview of the
maximum additional runtime and
consumption values when regenerating
the softening system.
2
Regenerating the softening
system after x washes
6
Additional running time in minutes
More water consumption in litres
More power consumption in kWh
7
5
0.05
1
The stated consumption values are
laboratory measured values which
are determined according to the
currently valid standard and on the
basis of the Eco 50° program and the
factory-set water hardness value of 13
- 16 °dH.
2.
Top up the rinse aid up to the max
mark.
G
Rinse System
lance flushing system
max
Rinse System
rinse aid
For optimal drying results it is best
to use the rinse aid.
Only use rinse aid for household
dishwashers.
3.
If rinse aid has spilled over, it must
be removed from the rinse aid
container.
Rinse aid spilled over can cause
excessive foaming during the wash
cycle.
Filling rinse aid
If the rinse aid refill indicator lights up,
add rinse aid. Only use rinse aid for
household dishwashers.
4.
Close the lid of the rinse aid
reservoir.
aThe lid audibly clicks into place.
Set the rinse aid amount
If streaks or water spots remain on the
dishes, adjust the amount of rinse aid.
1.
Press.
26
