en
Basic settings
38
Basic setting
Display text
Selection
Description
Start programme
SP:01
1
SP:00 - SP:01
Set a default programme for when
the appliance is switched on.
¡
With the setting "SP:00", the last
programme selected is set by de-
fault for when the appliance is
switched on.
¡
With the setting "SP:01", the Eco
50° programme is set by default
for when the appliance is
switched on.
Tone volume
SL:02
1
SL:00 -SL:03
Adjustment of tone volume.
Level "SL:00" switches the signal
tone off.
Button volume
bL:02
1
bL:00 - bL:03
Set the button volume during opera-
tion. Level "bL:00" switches the but-
ton tones off.
Wi-Fi
Cn:00
1
Cn:00 - Cn:01
Switch the wireless network connec-
tion on or off.
Level "Cn:00" switches the wireless
network connection off.
Remote Start
rc:01
1
rc:00 - rc:02
Activate or deactivate
.
The following settings are possible:
¡
With the setting "rc:00", the func-
tion is permanently deactivated.
¡
With the setting "rc:01", the func-
tion can be selected via the
button.
¡
With the setting "rc:02", the func-
tion is permanently activated.
Factory setting
rE:
Start with
Y:ES
Confirm with
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
1
Factory setting (may vary according to model)
Changing basic settings
1.
Press .
2.
To open the basic settings, press
for 3 seconds.
a
The display shows H:xx.
a
The display shows
.
3.
Press
repeatedly until
the display shows the required set-
ting.
4.
Press or repeatedly until the
display shows the right value.
You can change several settings.
Содержание SMS6ZDW48E
Страница 14: ...en Installation and connection 14 3 Check that the mains plug is inser ted properly ...
Страница 62: ......
Страница 63: ......