TroubleshootingNL
Malfunction
Cause
Troubleshooting
All LEDs are on or
flashing.
Electronics has
detected an error.
1.
Press the main switch button for
approx. 4 seconds.
The device will reset and
restart.
2.
If the problem occurs
again:
†
Turn off the device.
†
Remove the mains plug from
the socket or switch off the
fuse in the meter box.
†
Wait at least 2 minutes.
† Switch on the fuse in the
meter box or insert the plug
into the socket.
† Turn on the device.
3.
If the problem occurs
again:
†
Contact customer
service.
Mechanical damage
Malfunction
Cause
Troubleshooting
Appliance door cannot
be closed.
The door lock has
tripped.
▶
Close the appliance door with more
force.
Door blocked due to an
installation error.
▶
Check whether the device has been
installed correctly.
The appliance door, door panel
or attachments must not hit
adjacent cupboards and the
worktop when closing.
The lid of the detergent
dispenser cannot be
closed.
Detergent dispenser or
lid are blocked by build-
up of detergent residue.
▶
Remove the detergent residue.
57