background image

en 

Customer Service

50

20 Customer Service

If you have any queries, are unable to
rectify faults on the appliance your-
self or if your appliance needs to be
repaired, contact Customer Service.
Function-relevant genuine spare parts
according to the corresponding Eco-
design Order can be obtained from
Customer Service for a period of at
least 10 years from the date on
which your appliance was placed on
the market within the European Eco-
nomic Area.

Note: 

Under the terms of the manu-

facturer's warranty the use of Cus-
tomer Service is free of charge.
Detailed information on the warranty
period and terms of warranty in your
country is available from our after-
sales service, your retailer or on our
website.
If you contact Customer Service, you
will require the product number (E-
Nr.) and the production number (FD)
of your appliance.
The contact details for Customer Ser-
vice can be found in the enclosed
Customer Service directory or on our
website.

20.1 Product number (E-Nr.)

and production number
(FD)

You can find the product number (E-
Nr.) and the production number (FD)
on the appliance's rating plate.
The rating plate is located inside the
appliance door.
Make a note of your appliance's de-
tails and the Customer Service tele-
phone number to find them again
quickly.

20.2 AQUA-STOP guarantee

1

In addition to warranty claims against
the seller under the purchase agree-
ment and in addition to our manufac-
turer's warranty, we will provide a re-
placement under the following condi-
tions.

¡

If our Aqua-Stop system is defect-
ive and causes water damage, we
will make good the damage for
private users. To ensure protection
from water damage, the appliance
must be connected to the power
supply.

¡

The liability guarantee is valid for
the service life of the appliance.

¡

A claim can only be made under
the guarantee if the appliance has
been correctly installed and con-
nected with Aqua-Stop according
to our instructions; this also in-
cludes correctly fitting the Aqua-
Stop extension (genuine access-
ory). Our guarantee does not cover
defective supply lines or fittings up
to the Aqua-Stop connection on
the tap.

¡

If your appliance is fitted with
Aqua-Stop, you can leave your ap-
pliance unattended during opera-
tion and the tap turned on after-
wards. The tap only needs to be
turned off if you are away from
home for a long period, e.g. on
holiday for several weeks.

1

Depending on the appliance specifications

Содержание SKS62E38EU





















































Отзывы: