Bosch SGV4HBX40E, Руководство пользователя

Страница: 24 / 60

NL Softening System
salt immediately before the program
start. The required amount of
softening salt depends on the water
hardness. The higher the water
hardness, the greater the amount of
softening salt required.
3. Note: Only use special salt for
dishwashers.
Do not use salt tablets. Do not
use table salt.
Place the softening salt in the
softening salt reservoir.
PAY ATTENTION!
s
Dishwasher detergent can damage
the water softener.
▶
The reservoir of the softener
Only fill the water supply with
special salt for dishwashers.
The rinse aid container can be
corroded by dishwasher softening
salt.
▶
To ensure that
spills out of the softening salt
from the rinse aid container, the
softening salt must be filled into
the water softening salt
reservoir immediately before the
program starts.
a
s
Funnel 1
Fill the water softening salt
reservoir completely with softening
salt. The water in the reservoir is
displaced and flows away.
4.
Fit and close the lid of the
reservoir.
1.
Open the lid of the softening salt
reservoir and remove it.
Switch off water softening
2.
When using for the first time: fill
the reservoir completely with water.
If the refilling salt display bothers you,
for example if you use a combined
dishwasher detergent with a salt
component, you can switch off the
display.
Remark
To avoid damage to the appliance,
only switch off the water softening
in the following cases:
s The water hardness is maximum
times 21 °dH and you use a
combined dishwasher detergent
with salt substitutes. You can use
combination detergents with salt
substitutes
1 Depending on the device version
24