en
18
Status Inquiry
You can check the current status of your
dishwasher at any time.
Remote Control
The serve@Home system allows you to
select the programme and to start the
dishwasher. To take advantage of this
service you must set the dishwasher’s
mode to “Remote Control: On”.
Advice and Warning Messages
These messages can be transmitted from
your dishwasher to your operating unit.
Remote Diagnosis
You can transmit error messages to the
Customer Support, thereby helping in the
diagnosis.
Adjusting the appliance
Switching on the appliance
Turn on the tap fully.
Switch on the appliance with the main
switch
1
and, if required, top up with
salt and rinse aid (see chapters “Filling
with salt”, “Filling with rinse aid”). The
main menu is then displayed.
Auto Wash
<
>
After switching on the Main Menu shows
the programme “Auto Wash”.
Setting the Programme
From the programme “Auto Wash” in the
Main Menu you can select among the
following programmes:
“Auto Super Wash” –
“Auto Wash” –
“Auto Delicate Wash” –
“Short Rinse” –
“Prerinse Only”.
Set the desired programme by using
the buttons – or +
3
.
The auto programmes “Auto Super Wash”,
“Auto Wash”, and “Auto Delicate Wash”
automatically match the programme to the
amount and soil level of the dishes. This
keeps the energy and water consumption
as low as possible.
Using the following programme overview
you can select the appropriate programme
for the type, amount, and soil level of the
dishes.
Downloaded from DishWasher-Manual.com Manuals
