manualshive.com logo in svg

Bosch Security Escort SE2000 Series, Руководство по обучению, Страница: 229 / 248

Поделиться
Скачать
Bosch Security Escort SE2000 Series Скачать руководство пользователя страница 229

Security Escort

System menus and dialogs | en

229

Robert Bosch (SEA) Pte Ltd

Training Manual

2017.08 | V2.18.1.0 | DOC

Demo test subscriber 1

For demonstration only, and can’t be used in a live system.
It simulates a test from the subscriber with transmitter ID
number 1.

Demo test subscriber 2

For demonstration only, and can’t be used in a live system.
It simulates a test from the subscriber with transmitter ID
number 2.

Demo test subscriber 3 with low
battery

For demonstration only, and can’t be used in a live system.
It simulates a test from the subscriber with transmitter ID
number 3. This test also reports low battery.

Demo troubles

For demonstration only, and can’t be used in a live system.
It simulates troubles from a transponder. Point troubles are
simulated for AC loss, tamper and no response.
Transponder troubles are simulated for remote key and
remote key tamper. The individual troubles can be enabled
or disabled in the 

Popup Trouble Filter

 dialog. The trouble

delay in the 

Popup Trouble Filter

 dialog will also affect

these troubles. Therefore, for demo purposes, it should be
set to 0.

Demo trouble restoral

For demonstration only, and can’t be used in a live system.
It simulates trouble restorals for all the troubles sent in

Demo Troubles

.

Demo maintenance alarm

For demonstration only, and can’t be used in a live system.
It simulates an alarm from a maintenance transmitter.

Demo maintenance test

For demonstration only, and can’t be used in a live system.
It simulates a test from a maintenance transmitter.

8.6.1

About dialog

The 

About

 dialog presents the version information, copyright data and internal processing

timers.

Содержание Security Escort SE2000 Series

























































































































































































































































Отзывы:

Нет отзывов