Bosch SBV8ZCX02E, Руководство пользователя

Страница: 13 / 68

Set up and connectNL
Tip:For proper drying with zeolite, do
not place dishes directly in front of
the suction opening and discharge
opening of the zeolite reservoir.
Do not place temperature-sensitive
crockery directly in front of the outlet
opening of the zeolite container.
→ †Device", Page 16
Sensor level
Sensitive
Description
Adjusts the program strength
even with small amounts of
dirt for effective removal of
food residues. Energy
consumption and water
consumption are matched
accordingly
stably adjusted.
Aquasensor
Very sensitive
Adjusts the program
strength for tougher
usage conditions, for
example heavily dried-
on food.
Recommended setting
when using organic or
ecological detergents
with lower amounts
active substances. It
energy consumption and
water consumption are
adjusted accordingly.
The aquasensor is an optical
measuring device (photocell) with
which the turbidity of the washing
water is measured. Water can be
saved with the aqua sensor.
The use of the aquasensor depends on
the specific program. In case of heavy
pollution, the washing-up water is
pumped out and replaced with fresh
water. In the case of minor soiling, the
washing water is also used during the
next washing phase and the water
consumption can be reduced by 3-6
liters. In the automatic programs, the
temperature and running time are also
adapted to the degree of soiling.
O
O
set upand connect
set up and connect
O
s
set up and connect
close the appliance for correct
use in an expert manner on electricity
and water. Observe the required
criteria and the installation
instructions.
Sensors
The sensor system adjusts the
program progress and the program
strength of the automatic programs
to the amount and type of soiling.
The sensor system has different
sensitivity levels that you can change
in the basic settings.
→ †Change basic settings",
page 41
Scope of supply
After unpacking, check all parts for
transport damage and the
completeness of the delivery.
For complaints, please contact the
store where you purchased the
device or our customer service.
Remark:The device has been checked
at the factory for correct operation.
Water stains may remain on the
device. The water stains disappear
after the first wash cycle.
Sensor level
Standard
Description
Optimal setting for
mixed loads and high
amounts of dirt. Energy
and water saving.
The delivery consists of:
13