manualshive.com logo in svg

Bosch RTS RVON+, Техническое руководство, Страница: 25 / 46

Поделиться
Скачать
Bosch RTS RVON+ Скачать руководство пользователя страница 25

RVON+

Installation  21

Reset Authentication Table Button (AZedit Only)

The 

Reset Authentication Table

 button (see Figure 8 on page 20) is used to reset the authentication to the RVON+ card. By 

clicking this button, the authentication table for IPedit is reset to the two default user profiles and passwords. Use this function 
when the password for IPedit cannot be remembered.

The default user profiles are:

telex – password
admin – password

To 

reset the authentication table to its default profiles

, do the following:

1.

From the System menu, select 

Miscellaneous|RVON Configuration

.

The RVON Configuration window appears.

2.

From the Slot drop down menu, select the 

slot

 of the RVON+ card.

3.

Click the 

Reset Authentication Table button

.

A verification message appears

.

Enter Boot loader Mode

The RVON+ card is shipped with current firmware pre-installed from the factory. The firmware includes a boot loader, which 
is used if the application program becomes corrupt (for example, if the card is reset while it is reprogramming the flash).

To 

force the card into boot loader mode

, do the following:

1.

On the RVON+ front card, press and hold the two 

front card buttons

.

2.

Press the 

Reset button

.

The card starts the reset process.

3.

Once the green LEDs start tracking back and forth, release the

 1 

and

 2 buttons

.

The card is in boot loader mode.

NOTE:

To verify the RVON+ card is in boot loader mode, open the AZedit I/O Card Version dialog (Status | Software 

Versions | I/O Cards).

Содержание RTS RVON+















































Отзывы:

Нет отзывов