RE 30232-01-B, Edition 04.2020, Bosch Rexroth AG
About this documentation |
Valve amplifier VT-MSPA2-2X
5 | 36
1 About this documentation
1.1
VALIDITY OF THE DOCUMENTATION
This documentation is valid for the valve amplifier VT-MSPA2-2X/A5/1A0/000 from
Bosch Rexroth.
This documentation is intended for fitters, operators, service technicians, system
operators and machine manufacturers.
This documentation contains important information on the safe and appropriate
installation, transport, commissioning, operation, use, maintenance, and removal
of the product.
▶ Read this documentation thoroughly, especially Chapter 2 “Safety instructions“
and Chapter 3 “General notes on damage to property and damage to the
product“, before working with the product.
1.2
REQUIRED AND SUPPLEMENTARY DOCUMENTATION
▶ The product must not be commissioned until you have been provided with the
documentation marked with the book symbol
and you have understood and
observed it. The documentations can be found on the product site or at
www.boschrexroth.com/mediadirectory
.
Table 1: Required and supplementary documentation
Title
Document number
Document type
Order confirmation
Valve amplifier for proportional valves without electrical position
feedback, maximum current limitation 1 A, type VT-MSPA2-2X/
A5/1A0/000
30232-01
Data sheet
1.3
REPRESENTATION OF INFORMATION
In order that this documentation allows you to work directly and safely with your
product, standardized safety notes, symbols, terms, and abbreviations are used.
For a better understanding, they are explained in the following sections.
1.3.1 Safety instructions
In this documentation, safety instructions precede a sequence of activities
whenever there is a risk of personal injury or damage to equipment. The hazard
avoidance measures described must be observed.
Safety instructions are structured as follows:
SIGNAL WORD
Type and source of danger!
Consequences in case of non-compliance
▶ Hazard avoidance measures
▶ <Enumeration>
•
Warning symbol:
draws attention to a hazard
•
Signal word:
identifies the degree of hazard
