10/36
Valve amplifier VT-MSPA2-2X
| General information on damage to property and damage to the product
Bosch Rexroth AG, Edition 04.2020, RE 30232-01-B
CAUTION
Fault currents and short-circuits!
Impairment of safety and malfunction.
▶ Keep the surroundings free from electrically conductive contamination (acids,
bases, corrosive agents, salts, metal vapors, etc.) and do not expose the
device to these substances. Generally rule out any deposits according to
protection class IP.
2.7
PERSONAL PROTECTIVE EQUIPMENT
Check determined personal protective equipment for completeness and protective
effect and wear it (observe customer regulations and list of personal protective
equipment).
3 General information on
damage to property
and damage to the product
NOTICE
High voltage!
The electronics may be damaged.
▶ Wire electronics from Bosch Rexroth only when these are disconnected from
the power supply.
Wrong cables! Power loss, scorching of cable!
Risk of damage to the product!
▶ Only use the cables specified in the data sheet with the respective cable
cross-sections for electronic devices from Bosch Rexroth!
Radiated interference!
Risk of malfunction.
▶ The distance to radio sources must be sufficiently large (>> 1 m).
▶ In the case of strongly fluctuating operating voltage, it may be necessary to
use an external smoothing capacitor in individual cases.
Emitted interference!
Risk of affecting other devices.
▶ Use shielded signal and solenoids cables in order that EMC requirements are
fulfilled.
