background image

About this documentation

1.1 

Validity of this documentation

This documentation applies to the variable-speed pump drives Sytronix 7020

with drive controllers of the Rexroth IndraDrive product range.
The content of the present documentation focuses on information about the

electric drive system.
For general information on the Rexroth IndraDrive electric drive system. see

the supplementary documentations.
Motor-pump units are described in separate operating instructions. These in‐

struction  manuals  contain  information  on  supplementary  documentations

(motors, pumps, hydraulic fluids, etc.).
Where required, this documentation refers to the supplementary documenta‐

tions.

1.2 

Supplementary documentations

1.2.1 

Sytronix SvP 7020

Title

Document type

Material number

de (en)

Rexroth Sytronix SvP 7020 PFC, Variable-Speed Pump Drives

Commissioning manual

R911379549

(R911379550)

Sytronix – variable-speed pump drives

 1)

Product catalog

R999000331

(R999000332)

1)

This documentation contains information on supplementary

documentations of the individual components (motors, pumps,

hydraulic fluids, etc.).

Tab. 1-1:

Documentations, motor-pump units

1.2.2 

Motor-pump units

Title

Document type

Material number

de (en)

Rexroth Sytronix SvP 70xx Motor-Pump Unit MPA01

 1)

Operating instructions

R911339822

(R911339824)

Rexroth Sytronix SvP 70xx Motor-Pump Unit MPA02

 1)

Operating instructions

R911387040

(R911387041)

Sytronix – variable-speed pump drives

 1)

Product catalog

R999000331

(R999000332)

Sytronix 50xx/70xx Couplings, Bellhousing

Project planning manual

R911346864

(R911346865)

1)

This documentation contains information on supplementary

documentations of the individual components (motors, pumps,

hydraulic fluids, etc.).

Tab. 1-2:

Documentations, motor-pump units

Sytronix SvP 7020 PFC 03 Variable-Speed Positioning of Hy‐

draulic Axes  

1/69

About this documentation

RE 62314-B_Edition 01 Bosch Rexroth AG

Содержание rexroth Sytronix SvP 7020 PFC 03













































































Отзывы: