Bosch Rexroth PS5000, Инструкция по вводу в эксплуатацию и эксплуатации

Страница: 37 / 56

Electric Drives
and Controls
4 − 7 Bosch Rexroth AG BT 6.00 1070080078 / 03
Operation
4.4 Quick mode
You may use the Quick mode in order to call up a certain screen of any
sublevel without any detours.
L
Proceed as follows:
.
At any time, you may
press key
in order to go back to the highest menu level, or
press key in order to go back to the previous menu level dis-
played.
1. Press
F
key.
The BT 6 changes to Quick mode. This condition is indicated by the
lighted integrated key LED.
The screen for selecting a parameter number is displayed.
Line 1: QUICKMODE
Line 2: Schedule < # >
Line 3: Parameter < # >
Line 4: <Description of parameter in plain text>
2. If it is necessary to select a certain welding program, move the cursor
with the or key to line 2 and set the desired number.
Use the number keys, the keys
+
or
−
for this purpose.
3. If you have used the number keys for selection, press in order to
display the selected number.
4. Move the cursor to line 3 with the or key and enter the desired
parameter number with the number keys, or keys
+
or
−
. An over-
view of the parameter numbers available is given in the next table.
5. If you have used the number keys for parameter selection, press
in order to display the selected parameter number.
.
Line 4 shows the related parameter name in plain text. When select-
ing a parameter number that is not available or not defined, the BT 6
will display the text ”undefined” in line 4.
6. Press
F
key.
The BT 6 changes to the selected sub-level. The integrated key LED
goes off.