10.7 Mounting cut-out
2
1
①
Mounting cut-out
Fig. 10-13: Mounting cut-out
Display size
Width
①
Height
②
15"
412.40
Tolerance ±0.7
261.70
Tolerance ±0.4
Tab. 10-3: Mounting cut-out in millimeters
Ensure the IP protection class:
●
Observe the tolerance specifications for the mounting cut-out!
●
Observe the wall thickness for the mounting cut-out! Minimum of
2 mm and maximum of 6 mm.
●
Consider the weight of the display and of the PC. Especially if
there is a strong vibration. Reinforce the front plate with slates at
the internal side close of the mounting cut-out if required.
28/45
Mounting, demounting and electric installation
PR30 and VR30 Control Cabinet PC and
Panel PC
Bosch Rexroth AG R911384706_Edition 01
